Evi Qhadriaty. PENGOLAHAN LIMBAHCAIR PABRIKKELAPA SAWIT SECARAELEKTROKOAGULASI DAN ADVANCED OXIDATION PROCESS SECARA SIMULTAN. Banda Aceh : Universitas Syiah Kuala, 2017

Abstrak

Abstrak limbah cair pabrik kelapa sawit mengandung bahan organik yang tinggi. metode konvensional yang umum digunakan adalah system lagoon berupa kolam anaerobik dan kolam aerobik dengan ukuran yang sangat luas. pada penelitian i dilakukan pengolahan limbah cair pabrik kelapa sawit dengan metode kombinasi elektrokoagulasi dan advaced oxidation process (aop) secara simultan. elektroda yang dipakai adalah besi dan aluminium. sebagai pembentuk reagant fenton digunakan larutan h 2 o 2 teknis. penelitian ini bertujuan untuk membandingankan penurunan nilai cod, penurunan nilai kekeruhan dan pengaruh ph pada penggunaan jumlah dan jenis elektroda yang digunakan. penentuan kondisi optimum digunakan rsm box benhken. limbah cair pabrik kelapa sawit digunakan berasal dari kolam anaerobik tiga, diambil dan dianalisa karakteristik awalnya yaitu cod, ph dan kekeruhan. pada penggunaan elektroda fe-fe dan al-al (susunan 2 pasang elektroda) didapat penurunan kekeruhan sebesar 96,83%

Baca Juga : APLIKASI METODE ADVANCED OXIDATION PROCESS FENTON DAN FENTON-LIKE TERHADAP LIMBAH CAIR PABRIK KELAPA SAWIT (Ruka Yulia, 2015) ,

Baca Juga : PRARANCANGAN PABRIK SABUN CAIR DARI OLEIN DENGAN KAPASITAS BAHAN BAKU 1.379 TON/TAHUN (Ilham Akbar S, 2017) ,

ngan ph 8,24. pada kondisi ini voltase yang digunakan adalah 12 volt, waktu selama 30 menit dan volume h 2 adalah 20 ml. sedangkan penurunan cod adalah 95,45%. pada penggunaan elektroda fe-fe, al-al dan al-al (susunan 3 pasang elektroda) didapat penurunan kekeruhan sebesar 97,35% dengan ph 8,92. pada kondisi ini voltase yang digunakan adalah 12 volt, waktu selama 30 menit dan volume h 2 o 2 adalah 20 ml. penurunan cod adalah sebesar 96,95%. kata kunci : limbah cair kelapa sawit, elektrokoagulasi, aop, response surface methodology, box-behnken o 2 abstract oil palm mill effluent consist high organic compound. the conventional methode that normally used is lagoon system, which is be in the form of anaerobic and aerobic pond that have large dimensions. this reseach is using combination method electrocoadulation and advanced oxidation process (aop) simultanously. the electrodes used were iron and aluminium. as reagent fenton used was h2o2 liquid. this reseach aim to compare the reduction valse of cod, the reduction valve of turbidity and the influence of ph on the volume and type of electrode that used. box-benhken was used to determine the optimum condition. the source of oil palm mill effluent was came from the third anaerobis pond wihich has been taken and analyse the characteristic of the sample were cod, ph and turbidity. on the used of fe-fe electrode and al-al (4 layer electrode) it found that the reduction of turbidity was 96,83% with the ph was 8,24. the voltage was 12 volt for 30 menit and the volume h2o2 was 20 ml. while reduction of cod was 95,45%. whereas on the used of fe-fe, al-al and al-al electrode (6 layer electrode) was found the reduction of turbidity was 97,44% with the ph was 8,92. the voltage used was 12 volt for 30 menit and the volume h2o2 was 20 ml. the reduction of cod was 96,95%. keywords : palm oil mill effluent, electrocoagulation, aop, response surface methodology,

Tulisan yang relevan

PRARANCANGAN PABRIK SABUN CAIR DARI OLEIN DENGAN KAPASITAS BAHAN BAKU 1.379 TON/TAHUN (Rahmad Danil, 2017) ,

EVALUASI KINERJA INSTALASI PENGOLAHAN AIR LIMBAH (IPAL) UNIT SISTEM ADVANCED OXIDATION PROCESSES DALAM PENGOLAHAN LIMBAH CAIR RSUD DR. H. YULIDDIN AWAY TAPAKTUAN (AHADI JUNAIRI, 2016) ,

ANALISIS KELAYAKAN USAHA PRODUKSI ASAP CAIR DARI LIMBAH BIOMASSA INDUSTRI KELAPA SAWIT SEBAGAI PESTISIDA ALAMI DI KABUPATEN ACEH TIMUR (LENI YUNIDAR, 2016) ,


Kembali ke halaman sebelumnya


Pencarian

Advance



Jenis Akses


Tahun Terbit

   

Program Studi